Application and validation of a statistically derived risk-based sampling plan to improve efficiency of inspection and enforcement

The statistically derived risk-based sampling plan for surveillance sample assignments of chemical and biological hazards was designed using binomial probability distribution. The binomial statistics was applied to the past 3-year data to estimate a confidence interval and a sample size aiming to improve efficiency and effectiveness of the agency's sampling and inspectional activities. The accuracy of the statistical models and computed estimates were validated in the following years. The ranges of confidence interval and sample size appeared to be significantly influenced by a level of the violation rate of feed product samples, an acceptable error, a number of the analyzed samples, and a statistical significance level. The violation rates of feed products for target analytes (aflatoxins, fumonisins, Salmonella, and dioxin) in the validation data were lower than those of the average 3-year data in most feed products. Besides, the actual violation rates of the validation samples did not exactly fall within the anticipated range of the confidence interval estimates. Such a discrepancy is considered introduced by several factors such as sample size adequacy, skewed distribution of a target analyte in feed products, and unique analyte/product combination. The overall study results indicate that the risk-based plan of work would provide a more effective and efficient risk management tool to help improve the oversight of the feed industry and the compliance to feed safety standards.     

Numerical Simulation of Dopant Diffusion for Laser-Doped Crystalline Silicon

In this paper, the nonlinear numerical simulation of pulsed laser melting of crystalline silicon and phosphorus dopant liquid-phase diffusion has been established by the finite element method implemented in ANSYS. The melt front behavior as a function of time is described. The experimental SIMS work is intended to be used to validate the numerical model. The numerical simulation result is in good agreement with the corresponding experimental data.     

凉感纤维织物导热系数影响因素的探讨

采用普通涤纶、含1%云母颗粒的涤纶(1%云母/涤纶)以及含5%云母颗粒的涤纶(5%云母/涤纶)三种材质,上机纬密采用200根/10 cm、300根/10 cm、400根/10 cm,组织采用平纹、斜纹、缎纹试织试样。通过Hot Disk热常数分析仪,采用正交试验及极差、方差分析,研究了纤维材质、上机纬密、组织对凉感纤维织物导热系数的影响。结果表明:在试验设置变量范围内,纤维材质对导热系数的影响显著,上机纬密、组织对导热系数的影响高度显著,影响因素从大到小顺序为上机纬密>组织>纤维材质。     

Birthweight and Lipids in Adult Life: Population-Based Cross Sectional Study

The purpose of this study was to examine the association of birthweight with lipid profile in the general adult population. Participants in the second-wave of a nationally representative cross sectional AusDiab-study were asked to complete a birthweight questionnaire. Fasting total cholesterol (TC), LDL-C, HDL-C, and triacylglycerol levels were modeled against birthweight. Four thousand five hundred and two people reported their birthweights, mean (SD) of 3.4(0.7) kg. Females with low birthweight-LBW had higher levels of TC, LDL-C, and triacylglycerols, but no difference in HDL-C, than those with normal-birthweight-NBW;≥2.5 kg. People with LBW showed a trend toward increased risk for high TC (≥5.5 mmol/L) compared to NBW. Among females with LBW, the risk for high LDL-C (≥3.5 mmol/L) was increased compared to those of NBW. The risk for low HDL-C (<0.9 mmol/L) was increased among males with LBW compared to those with NBW. Examination of the relationship on the continuum showed no differences except for high triacylglycerol levels among females with the lowest birthweight quintile compared to the higher birthweight quintile. However, the risk for various abnormalities by birthweight quintiles was similar to that when we used the traditional definition of LBW vs. NBW. Females and males with low birthweight differ in their risk for lipids abnormalities. Females had higher risk for high LDL-C, whereas males had high risk for low HDL-C (<0.9 mmol/L). In addition, females with low birthweight had the highest triacylglycerol levels. High LDL-C, low HDL-C, and high triacylglycerols are well-recognized risk factors for cardiovascular disease.     

The influence of activated carbon as an additive in anode materials for low temperature solid oxide fuel cells

The effects of activated carbon (AC) as an additive in multi-oxide nano composite LiNiCuZn–O for application as anode in solid oxide fuel cell (SOFC) is reported. The composite was synthesized using solid state reactions method with varying content of AC in range 0.1%–0.9% for use as anode in the cell. The cell was composed of the synthesized composite as anode, LiNiCuZn–O as cathode and Samaria doped ceria (SDC) as electrolyte. The prepared composites were characterized for morphology and crystal structure by scanning electron microscope (SEM) and x-ray diffraction (XRD) respectively. Furthermore, the crystallite sizes of LiNiCuZn–O and LiNiCuZn–O with AC as an additive have been found in the range from 50 nm to 70 nm. The prepared composite materials were observed porous and the porosity of the sample having 0.5% additive was found highest. The conductivity and power density of the SOFC were studied at temperature of 600 °C. The maximum value of conductivity was found as 4.79 S/cm for the composite containing 0.5% AC as measured by using 4-probe method. The maximum value of power density of the fuel cell with anode comprising of 0.5% AC along with the mentioned cathode and the electrolyte was 455 mW/cm². Therefore, out of the compositions studied, the composite comprising of LiNiCuZn–O with 0.5% AC offered best performance for anode in the cell. This oxide composite is reported as a potential candidate for use as anode in low temperature SOFCs.     

地质构造及局部大倾角条件下综放工作面安全回采关键技术研究与应用

断层等地质构造是制约矿井安全生产的重要因素,尤其是在大倾角、大落差断层等条件下,片帮、漏冒顶等将会严重影响安全生产.针对大平矿3111工作面在最大倾角达30°条件下,通过三机防滑、注浆、爆破、调斜等措施,采取"硬过"的方式在大倾角条件下工作面顺利通过了大落差断层,取得了较好的实践效果,为矿井积累了宝贵的回采经验.     

Achieving Efficient Alkaline Hydrogen Evolution Reaction over a Ni5P4 Catalyst Incorporating Single-Atomic Ru Sites

Developing efficient electrocatalysts for alkaline water electrolysis is central to substantial progress of alkaline hydrogen production. Herein, a Ni₅P₄ electrocatalyst incorporating single-atom Ru (Ni₅P₄-Ru) is synthesized through the filling of Ru³⁺ species into the metal vacancies of nickel hydroxides and subsequent phosphorization treatment. Electron paramagnetic resonance spectroscopy, X-ray-based measurements, and electron microscopy observations confirm the strong interaction between the nickel-vacancy defect and Ru cation, resulting in more than 3.83 wt% single-atom Ru incorporation in the obtained Ni₅P₄-Ru. The Ni₅P₄-Ru as an alkaline hydrogen evolution reaction catalyst achieves low onset potential of 17 mV and an overpotential of 54 mV at a current density of 10 mA cm^-2 together with a small Tafel slope of 52.0 mV decade^-1 and long-term stability. Further spectroscopy analyses combined with density functional theory calculations reveal that the doped Ru sites can cause localized structure polarization, which brings the low energy barrier for water dissociation on Ru site and the optimized hydrogen adsorption free energy on the interstitial site, well rationalizing the experimental reactivity.     

High energy storage properties of lead-free Mn-doped (1-x)AgNbO3-xBi0.5Na0.5TiO3 antiferroelectric ceramics

In this work, 0.2 wt.% Mn-doped (1-x)AgNbO₃-xBi_0.5Na_0.5TiO₃ (x = 0.00–0.04) ceramics were synthesized via solid state reaction method in flowing oxygen. The evolution of microstructure, phase transition and energy storage properties were investigated to evaluate the potential as high energy storage capacitors. Relaxor ferroelectric Bi_0.5Na_0.5TiO₃ was introduced to stabilize the antiferroelectric state through modulating the M₁-M₂ phase transition. Enhanced energy storage performance was achieved for the 3 mol% Bi_0.5Na_0.5TiO₃ doped AgNbO₃ ceramic with high recoverable energy density of 3.4 J/cm³ and energy efficiency of 62% under an applied field of 220 kV/cm. The improved energy storage performance can be attributed to the stabilized antiferroelectricity and decreased electrical hysteresis ΔE. In addition, the ceramics also displayed excellent thermal stability with low energy density variation (<6%) over a wide temperature range of 20−80 °C. These results indicate that Mn-doped (1-x)AgNbO₃-xBi_0.5Na_0.5TiO₃ ceramics are highly efficient lead-free antiferroelectric materials for potential application in high energy storage capacitors.